The H2flow magnetic water conditioner and limescale inhibitor is a simple and effective way to provide magnetically treated water to your home.

The H2flow Magnetic water conditioner and lime scale inhibitor utilizes CRP magnet technology with the latest and extremely powerful Neodymium magnets. Numerous studies have shown that passing water through a magnetic field can reduce and prevent the problems caused by hard water, so why not give it a try? Incredibly easy to fit, plus these units demand no power source or maintenance. Simply straps onto the incoming water pipe.

Unlike chemical water softeners, or costly and complicated electrical magnetic water conditioners, the H2 Flow simply straps onto your mains water inlet pipe with the supplied straps, providing a constant supply of magnetically treated water.

From the moment you fit your H2flow it will begin to prevent limescale build up and over a period of time will gradually soften and remove existing lime scale from your home's water system.

The H2flow can also make a saving to fuel bills, as the build up of lime scale greatly decreases an immersion heater's efficiency.

This amazing product is a simple and effective solution to the problems associated with hard water.

Shower heads, sink taps and bathroom surfaces remain free from lime scale build-up, household appliances such as kettles will stay cleaner and last longer.

Immersion heaters will not clog up with limescale, thereby greatly extending their life span and saving on costly replacements.

Thermoflow Magnetic Fuel Conditioner

Thermoflow improves combustion by magnetically conditioning the fuel. A more complete 'burn' means more heat and energy from the same amount of fuel. Similar to the H2 Flow, these units take seconds to fit, with no pipe cutting needed or power supply required.

Easy to fit

No special tools or knowledge needed

No power supply required

No running costs or maintenance required

Reduce fuel bills

Thermoflow has been specifically designed to improve the combustion of oil and gas fired burners by conditioning the fuel prior to combustion. In a similar way that water conditioned by heat (hot water) carries more energy and mixes with other substances more readily than cold water, fuel conditioned by a strong magnetic field carries more energy and mixes more readily with air resulting in a more complete combustion i.e. more energy and less waste from the same amount of fuel. This process of conditioning fuel through the introduction of a specific magnetic field is known as Ionisation by Magnetic Induction (IMI).

Thermoflow is a unique (patented) magnetic device that requires no power source or maintenance and simply straps to the incoming oil or gas fuel line. It takes seconds to fit and requires no pipe cutting.

Customers cannot believe the difference it can make, claiming they have been making savings of anywhere between 10%-20% - a financial bonus which is hard to ignore whether you're a householder or an industrial giant.

This website is produced and maintained by Body & Mind Shop Limited, an independent distributor of Ecoflow products. It is not nor has it any connection with, the home page or other official website pages of Ecoflow plc. All claims on this site are made by the owner as an independent distributor and Ecoflow plc accepts no responsibility for the content of any such claims made in relation to Ecoflow plc, its products and/or the business opportunity.

Thermoflow
This fantastic product will pay for itself many times over.

Easy to fit

No special tools or knowledge required

No power supply needed

No pipe cutting

Just straps onto the fuel line

Save on fuel bills year after year

How much will I save?
It will depend on many factors such as the condition and type of appliance, the type of fuel and the work load of the applience. Some customers tell us of savings of nearly 30% on there fuel bills, a normal domestic installation should see savings of between 10% and 20% of the annual fuel bill - not only for the next year but the year after that and every year the Thermoflow is fitted!

Will it work on any fuel?
Thermoflow will work on virtually all hydrocarbon based fuels. It is equally effective on domestic and industrial oil, natural gas, bottle gas, propane, and butane.

What about servicing my boiler?
The improved combustion created by fitting a Thermoflow means that your boiler will burn more efficiently. This means that there will be reductions in the carbon deposits (soot) inside the burner. Servicing will now be much easier and a lot less messy!

How many THERMOFLOWS do I need?
Most domestic boilers only need one Thermoflow fitted on the fuel line close to the boiler. Larger properties, with boilers rated over 85,000 BTU, will require two. If your boiler is over 170,000 BTU, then please contact us for more detailed advice.

Thermoflow will keep making these same savings year after year, reducing your fuel bill and helping to ensure the enviroment is that little bit greener.

Thermoflow magnetic fuel conditioners are currently used in countless family homes, offices and factories to dramatically reduce fuel consumption and harmful exhaust emissions.

H2 flow and Thermoflow have a ‘90 day trial period satisfaction guarantee’
If for any reason you are not satisfied with the benefits of the product simply contact us for a refund.

H2 flow and Thermoflow are guaranteed for a period of 10 years against faulty parts and workmanship. The magnetic properties are guaranteed for life.